EasyManua.ls Logo

Bond 52010 - Final Assembly and Connection; Propane Tank Installation; Regulator Connection

Bond 52010
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Put the 20 lb. propane gas tank (not included)
into the tank holder ( ). Turn the wing screw on
the outside of the tank holder ( I ) clockwise to
tighten the tank into the tank holder.
Propane tank must be a minimum of 60 inches
away at all times.
DANGER
CYLINDER VALVE
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
BLACK COUPLING NUT
REGULATOR
turn clockwise to connect
turn clockwise
to reseal
5. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the regulator to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by
hand only.
I
ASSEMBLY INSTRUCTIONS
I
. Pour the lava rocks (J) into the
middle of the firebowl body (A) evenly.
NNN
To ensure proper function, the guard
(F) on the burner should be free of
lava rocks (J) at all times.
ooo eeettt ::: Make sure that the holes on the
inside wall of the rebowl body (A) stay
unclogged of lava rocks.
WARNING
6
A
Always ensure that lava rocks/pumice stones/
LavaGlass
®
are completely dry before use.
Failure to do so will cause them to crack
Keep away from the unit and have the unit
to burn 20 minutes for the first time use.
Bond Manufacturing Co., Inc. | Page 8
J
F
or pop.

Related product manuals