BONFIGLIOLI Vectron Syn10 S115 01 User Manual

2
2
2. Examination before installation
Every inverter has been fully tested and examined before shipment. Please carry out the
following examination procedures after unpacking your AC inverter.
z
Check to see if the model number of the AC inverter matches the model number of the AC
inverter that you ordered.
z
Check to see whether any damage occurred to the AC inverter during shipment. Do not
connect the AC inverter to the power supply if there is any sign of damage.
Report this to a regional sale representative if you find any abnormal condition as mentioned
above.

BONFIGLIOLI Vectron Syn10 S115 01 Specifications

General

Category	Controller
Model	Vectron Syn10 S115 01
Frequency range	50/60 Hz
Protection class	IP20
Communication interface	CANopen
Relative humidity	< 95 % (non-condensing)