Boonton 4541 - Fetch:marker:cursor:percent; Fetch:marker:cursor:power; Fetch:marker:delta; Fetch:marker:maximum

Boonton 4540 Series RF Power Meter
Remote Operation
5-28
FETCh:MARKer:CURsor:PERcent?
Description: Return the CCDF cursor y-axis position in percent with respect to the value set by
MARKer:POSItion:POWer (CCDF cursor mode is Power Ref). If CCDF cursor mode is Percent,
returns user setting. See MARKer:POSItion:POWer and MARKer:POSItion:PERcent. See also
Section 6.4 Statistical Mode Automatic Measurements for more information.
Syntax: FETCh[1|2]:MARKer:CURsor:PERcent?
Returns: CC, percent CCDF
Where CC is the measurement condition code.
Valid Modes: Statistical.
FETCh:MARKer:CURsor:POWer?
Description: Return the CCDF cursor x-axis position in relative power with respect to the value set by
MARKer:POSItion:PERcent (CCDF cursor mode is Percent). If CCDF cursor mode is Power Ref,
returns user setting. See MARKer:POSItion:POWer and MARKer:POSItion:PERcent. See also
Section 6.4 Statistical Mode Automatic Measurements for more information.
Syntax: FETCh[1|2]:MARKer:CURsor:POWer?
Returns: CC, relative power (dBr) CCDF
Where CC is the measurement condition code.
Valid Modes: Pulse and Modulated.
FETCh:MARKer:DELTa?
Description: For the specified channel return the difference between MK1 and MK2. The units will be the same
as marker units.
Syntax: FETCh[1|2]:MARKer:DELTa?
Returns: CC, (MK1 – MK2)
Where CC is the measurement condition code.
Valid Modes: All
FETCh:MARKer:MAXimum?
Description: For the specified channel and marker, return the maximum power or voltage at the marker. The
units are the same as the specified channel.
Syntax: FETCh[1|2]:MARKer[1|2]:MAXimum?
Returns: CC, maximum power or voltage at marker
Where CC is the measurement condition code.
Valid Modes: Pulse and Modulated.