Need help?Do you have a question about the bora BIA and is the answer not in the manual?
Identifies intended users and required expertise for safe operation and assembly.
Explains standard formatting, numbering, symbols, and safety instructions used throughout the manual.
Details warning symbols, signal words (Danger, Warning, Caution), and their associated risks.
Covers user responsibility, reading instructions, safe use, avoiding damage, and general safe practices.
Advises on ventilation requirements and using the extractor in recirculated air mode.
Warns about potential interference with pacemakers, hearing aids, and metal implants from electromagnetic fields.
Outlines precautions for use by children and persons with limited capabilities, emphasizing supervision and child lock.
Warns against modifications to the device due to potential hazards.
Covers safety precautions for cleaning, emphasizing supervision and avoiding steam cleaners.
Provides crucial safety warnings for operating the cooktop, including fire risks, electric shock, and hot surfaces.
Details safety requirements for installation, electrical connections, and gas connections.
Covers safety aspects during disassembly, disposal, and handling of packaging.
Emphasizes using only original spare parts to prevent injury or damage.
Specifies the intended use of the device and lists prohibited applications.
Illustrates the main components of the cooktop and cooktop extractor.
Explains how the cooktop extractor functions in exhaust mode, including ducting requirements.
Details the recirculated air mode, including the use of activated charcoal filters for odour trapping.
Describes the touch controls, display fields, and overall operating principle of the device.
Explains the induction heating principle, cookware requirements, and power levels.
Details the power setting, automatic after-run, and filter service display for the extractor.
Covers residual heat display, safety shut-down, overheating protection, and child safety lock mechanisms.
Lists included components and advises checking for damage or missing parts.
Lists the necessary tools and aids required for the correct installation of the cooktop.
Provides step-by-step guidance for assembling and installing the device.
Specifies mandatory safety clearances around the cooktop for proper installation and function.
Details the required worktop cut-out dimensions for surface and flush installation.
Guides the installation process for the BIU model, including furniture dimensions and return flow apertures.
Covers the installation of the BIA model, including ducting requirements and safety for fireplaces.
Explains how to safely connect the device to the electrical power supply.
Outlines the procedures for handing over the installed device to the user, including explanations and documentation.
Details the steps for switching the entire cooktop on and off, and individual cooking zones.
Explains how to select and change the power levels for cooking zones.
Describes how to use the short-time timer (egg timer) and automatic cut-off timer.
Guides on how to enable and disable the child safety lock to prevent accidental operation.
Covers switching the extractor on/off, setting fan levels, and using delayed after-run.
Explains the meaning of the filter service display and how to reset it after maintenance.
Provides tips and recommendations for using the cooktop and extractor efficiently to save energy.
Lists suitable cleaning agents and warns against aggressive or abrasive products.
Advises on proper care of the cooktop surface, including avoiding its use as a worktop.
Provides detailed instructions for cleaning the cooktop, both when cold and hot.
Details how to clean the cooktop extractor components, including nozzle and grease filter.
Explains how to correctly install the grease filter and air inlet nozzle after cleaning.
Provides instructions for opening, closing, and cleaning the air guiding housing.
Guides on how to replace the activated charcoal filters for optimal odour trapping.
Lists causes and remedies for the cooktop or extractor fan failing to switch on.
Addresses initial odours during operation and persistent odour issues.
Explains the "u" display in the cooking zone indicator and its solution.
Explains the "L" display in the cooking zone indicator, indicating child safety lock.
Covers automatic shut-off of cooking zones due to operating time or overheat protection.
Explains the "E" display in the fan level indicator, indicating sensor button issues.
Details the "Er03" error across all cooking zones and its resolution.
Explains why the cooling fan may continue running after the cooktop is switched off.
Explains the "E" display in the cooking zone indicator, indicating an electronic system error.
Explains the "F" display indicating exceeded filter usage periods.
Addresses decreased extraction rate due to soiled filters or blocked air guiding housing.
Describes the final decommissioning process of the device.
Outlines the steps for safely disassembling the device for removal.
Provides guidance on the proper disposal of transport packaging and the old appliance.
States the warranty period for the product.
Provides contact information and procedures for BORA After Sales Service.
Advises on obtaining and using original spare parts for repairs.
To Next Page
General
