To Next PageTo Next PageWhy is the lock symbol brighter on my bora PUXU Cooktop?
If the lock symbol is brighter than the other indicators on your BORA Cooktop, it means the childproofing feature is activated. To resolve this, switch off the childproofing feature.
Why has the extraction performance of my bora PUXU Cooktop extractor decreased?
If the extraction performance of your BORA Cooktop extractor has decreased, the grease filter may be extremely dirty. To resolve this, clean or replace the grease filter. Alternatively, if you have a PUXU or PURU model, the activated charcoal filter might be extremely dirty, in which case you should replace it.
Why won't my BORA Cooktop or fan switch on?
If the cooktop or the fan of your BORA Cooktop cannot be switched on, it might be due to a defective fuse or automatic circuit breaker in your apartment's electrical wiring system. Try replacing the fuse. If that's not the case, try switching the automatic circuit breaker back on.
What does it mean when 03 is displayed on my bora PUXU Cooktop's rear cooking zones?
If 03 is displayed in the rear cooking zones of your BORA Cooktop, it means there is an object on the operating panel. Remove the object from the operating panel to resolve this.
Why is 'v' displayed in the cooking zone of my BORA Cooktop?
If 'v' is displayed in the cooking zone display of your BORA Cooktop, it indicates that there is no or unsuitable cookware on the cooking zone. Use suitable cookware and select the appropriate size depending on the cooking zone.
What to do if the fuse keeps tripping with my BORA Cooktop?
If the fuse or automatic circuit breaker trips several times on your BORA Cooktop, contact the BORA Service team for assistance.
Why does my BORA Cooktop automatically switch off?
If a cooking zone or the entire BORA Cooktop switches off automatically, it means the maximum cooking zone operating time has been exceeded. To resolve this, put the cooking zone back into operation.
Why does the cooling fan on my bora PUXU keep running after I turn it off?
If the cooktop cooling fan continues to run when the BORA Cooktop has been switched off, wait until the cooling fan switches off automatically.
What does 'E8' mean on the fan display of my bora PUXU?
If 'E8' is shown in the fan display of your BORA Cooktop, it indicates the use of a phase-separating window contact switch. Open the window.
Why is there a smell coming from my new bora PUXU extractor?
When a new BORA Cooktop extractor is in operation, the build-up of odours is normal. These odours will stop forming after a few operating hours.
General| Product category | Cooktop |
|---|---|
| Product name | PUXU |
| Frequency | 50/60 Hz |
| Automatic heat up function | Yes |
| Timer function | Yes |
| Child safety lock | Yes |
| Residual heat indicator | Yes |
Legal disclaimer regarding damages from non-adherence to documents or improper use.
Explains applicability to different appliance versions and schematic diagram usage.
Lists applicable EU directives for the appliances.
Explains formatting, symbols, and terms used in the manual for clarity.
Defines the sole intended use and prohibited uses of the appliance.
Safety considerations for children and individuals with reduced capacities.
Important safety warnings and precautions for appliance handling.
Safety guidelines specific to installation, including electrical connections.
Crucial safety instructions for operating the cooktop and extractor.
Safety precautions to be observed during cleaning and maintenance.
Safety guidelines for repairs, spare parts, and end-of-life disposal.
Detailed technical specifications and dimensions for the X Pure models.
Detailed technical specifications and dimensions for the Pure models.
Details energy consumption, efficiency classes, and sound power levels.
Lists available BORA Pure and X Pure models and their configurations.
Overview of the cooktop and extractor system components.
Explains the operational principles of exhaust air and recirculation modes.
Details the induction heating principle and cookware requirements.
Summarizes the key features and functions of the appliances.
Describes built-in safety mechanisms like childproofing and automatic shut-down.
Basic installation requirements, safety precautions, and ventilation.
Lists included items and necessary tools for installation.
Instructions for unit assembly and creating worktop cut-outs.
Specific instructions for installing in exhaust air or recirculation configurations.
Guides for electrical connection and initial configuration via dealer menu.
Steps for sealing the appliance and handing it over to the user.
Overview of control panel, touch controls, and basic operation principles.
Explains touch commands and basic system controls like power, locks, and timers.
Details on controlling the fan speed, automatic functions, and power settings.
Instructions for selecting zones, power levels, warming, bridging, and timers.
How to access and adjust system settings via the user menu.
Recommended cleaning agents and basic care practices for surfaces.
Step-by-step guide for cleaning the cooktop surface, including residue removal.
Instructions for cleaning the extractor, air inlet nozzle, grease filter, and housing.
Procedure for replacing the filter in recirculation mode.
Identifies common operational issues, their causes, and recommended remedies.
Steps for safely shutting down, disconnecting, and removing the appliance.
Guidelines for proper disposal of packaging and the old appliance.
Details warranty coverage, terms, and options for warranty extension.
Information on obtaining service and ordering replacement parts.
Lists available accessories for the BORA X Pure and Pure appliances.
General notes and remarks not covered in other sections.
