bora PUXU - Menu Item 5: Touch Zone Reaction Speed; Menu Item 6: LED Test; Menu Item 7: Permanent Pan Size Recognition

EN
46
Operation
www.bora.com
Starting the LED test
XX
Tap the slider zone
XO
All indicators are displayed at 50 % brightness.
XX
Tap any indicator you wish.
XO
The selected indicator will be displayed at 100% brightness for
one second.
XO
Any other indicators can be tested by touch as required.
Ending the LED test
XO
The LED test will be automatically ended when there has been
no activity for 5 seconds.
or
XX
long press on the multi-function display.
XO
The LED test is ended.
XX
Move to another menu item or close the menu.
7.6.7 Menu item 7:
Permanent pan size recognition
i
With menu item 7 the permanent pan size recognition
can be permanently switched on or off.
Fig. 7.8 Menu item 7: Permanent pan size recognition
Activating permanent pan size recognition
XX
Tap the top slider segment
XO
The pan size recognition symbol
v
,
is displayed on all cooking
zones for one second.
XO
o
n
is displayed.
XX
Move to another menu item or close the menu.
Deactivating permanent pan size recognition
XX
Tap the bottom slider segment
XX
Move to another menu item or close the menu.
7.6.5 Menu item 5:
Touch zone reaction speed
i
The reaction speed of the touch zones can be set using
menu item 5.
XO
Reaction speed 1 : slow
XO
Reaction speed 2 : medium
XO
Reaction speed 3 : fast
Fig. 7.6 Menu item 5: Reaction speed
XO
The current reaction speed is displayed.
Selecting the reaction speed:
XX
Tap the corresponding slider segment .
XX
Move to another menu item or close the menu.
7.6.6 Menu item 6:
LED test
i
With menu item 6 all LEDs in the individual touch zones
can be tested to ensure that they are working.
Fig. 7.7 Menu item 6: LED test