bora PUXU - Electronic Power Adjustment; Short-Time Timer (Egg Timer); Cooktop Extractor Functions; Automatic Extractor Control

EN
19
Device description
www.bora.com
XO
The cooktop extractor can still be operated without
limitations.
i
The components of the grease filter require regular
cleaning regardless of the filter service indicator
(see Cleaning and Maintenance chapter).
5.5.2 Cooktop functions
Automatic heat up function
When the automatic heat up function is activated, the cooking
zone works at full power for a certain time and is then
automatically reset to the previously set level.
Power level
(continuous cooking level)
Cooking duration in min:sec
1
00:40
2
01:00
3
02:00
4
03:00
5
04:20
6
07:00
7
02:00
8
03:00
Tab. 5.10 Heating time overview
Pan size recognition
The cooking zone recognises the size of the cookware
automatically and only targets the energy at that area. It also
recognises cookware that is unsuitable or too small or if there is
no cookware present.
A cooking zone is not working if
v
,
/
v
are alternated in the
display. This happens if...
XO
... it is switched on without cookware or with unsuitable
cookware.
XO
... the base diameter of the cookware is too small.
XO
... the cookware is removed from a switched-on cooking zone.
If no pot is recognised 10 minutes after setting a power level,
the cooking zone will switch off automatically.
Permanent pan size recognition
The cooking zone automatically recognises cookware and
switches the corresponding operating panel on: Manual
activation of the cooking zone is not necessary (see Operation
chapter, User menu).
One-level warming function
On the warming level, meals that have already been cooked can
be kept warm at a lower temperature without any risk of burning.
XO
The maximum duration for the warming function is preset to
8 hours.
i
You fill find instructions on how to use/set the individuals
functions in the Operation chapter.
Electronic power adjustment
The power levels are adjusted via the operating panel by tapping
or swiping movements on the touch slider. Alternatively the
power levels can also be set using the touch buttons and
above and below the touch slider.
Short-time timer (egg timer)
The short-time timer emits both a visual and an acoustic signal
after a time set by the user
and offers the function of a conventional egg timer.
5.5.1 Cooktop extractor functions
Automatic extractor control
The extractor power level automatically adjusts itself depending
on the current cooktop settings. No manual adjustment of the
fan controls is necessary but it is possible. The extractor power
is automatically adjusted to the highest power level used on all
connected cooking zones.
Function Power levels
Cooking level 1 2 3 4 5 6 7 8 9 P
Extractor power 4 4 4 4 5 6 7 8 9 P
Tab. 5.9 Extraction performance and cooking level
XO
If the power level of a cooking zone is changed, the extractor
power is automatically adjusted after a 20 second delay.
Automatic after-run
The cooktop extractor continues to run at a lower level and
switches off automatically after a defined time.
The duration of the after-run function can be set in the menu
(10, 15 or 20 minutes). The default duration of the after-run
function is 20 minutes.
XO
When the extractor is switched off at the end of cooking the
automatic after-run function is activated.
XO
Once the automatic after-run period has lapsed the cooktop
extractor switches itself off.
i
BORA expressly recommend use of the cooktop extractor
after-run function.
Cooktop extractor power setting
When the power setting is activated, maximum extractor power
is available for a predefined time.
This power setting makes it possible to suction away high levels
of cooking vapours more quickly. After 5 minutes, the power
setting is automatically switched to power level 9.
Filter service display
The cooktop extractor filter service indicator is automatically
activated when the end of the activated charcoal filter service
life is reached (only in recirculation mode).
XO
F is displayed in the multi-function display.
XO
The filter service display is shown every time the cooktop
extractor is switched on and remains active until the filter has
been changed and the filter service display has been reset
(see Operation chapter).