bora PUXU - Operating the Cooktop Extractor; Operating the Cooktop

EN
41
Operation
www.bora.com
Deactivating the automatic extractor function:
XX
Swipe to a fan power level
or
XX
tap the fan button .
7.4.4 Switching the fan off
XX
Swipe downwards to power level 0
or
XX
tap until power level 0 is reached.
or
XX
long press on the fan button .
or
XX
long press on the fan power level in the multi-function display.
XO
The automatic after-run function is started.
7.5 Operating the cooktop
7.5.1 Selecting a cooking zone
XX
Tap on a cooking zone
0
.
XO
The cooking zone controls are activated for 2 seconds and
you can apply settings to the chosen cooking zone.
XO
The additional cooking zone functions appear.
XX
Repeat this process to operate further cooking zones if
necessary.
Changing to another cooking zone
XX
Tap another cooking zone within 2 seconds.
XO
The cooking zone lights up in the operating panel display.
XO
Operation of the second cooking zone is activated.
XO
The first cooking zone is dimmed in the operating panel
display and the previous settings remain active or are
adopted.
7.5.2 Setting cooking zone power levels
i
The cooking zone power levels are shown in the
corresponding cooking zone display as a
7-segment font (
1
-
9
).
i
Two seconds after the power level is changed, the
operating panel display automatically returns to the
standard display.
The cooking zone power levels can be adjusted in
3 different ways:
XX
By tapping a certain position on the slider.
XX
By swiping until you reach the required power level.
XX
By tapping or .
7.4 Operating the cooktop extractor
7.4.1 Setting the fan power level
The fan power levels can be adjusted in 3 different ways.
XX
By tapping a certain position on the sli
der
.
XX
By swiping until you reach the required power level.
XX
By tapping or .
XO
The fan symbol lights up and the set fan power level is shown
in the multi-function display.
Increasing the power level
XX
Tap a higher position on the slider
or
XX
swipe upwards to the required power level
or
XX
tap until the required power level is reached.
Reducing the power level
XX
Tap a lower position on the slider
or
XX
swipe downwards to the required power level
or
XX
tap until the required power level is reached.
7.4.2 Fan power setting
Activating the fan power setting
XX
Tap on when power level 9 is active.
XO
ßp
appears in the display.
i
After 5 minutes, the power setting is automatically
switched back to power level 9.
Deactivating the fan power setting
The fan power setting is deactivated early if another power level
is set (see Fan power levels).
7.4.3 Automatic extractor control
i
The automatic extractor function automatically adjusts
the extraction performance to the highest power level
used on all connected cooking zones. If the cooking
zone power level is changed, the extractor power is
automatically adjusted.
i
The extractor power is adjusted after a 20 second delay.
Activating the automatic extractor function:
XX
tap the fan button .
XO
The fan symbol lights up.
XO
An animation appears on the slider.
XO
A
is displayed.