What to do if my BORA Cooktop or the fan cannot be switched on?
If your cooktop or the fan isn't switching on, the fuse or automatic circuit breaker in your home's electrical system might be defective. Try replacing the fuse. Also, the power supply may be disconnected, in which case you should have a specialist electrician inspect it.
What does E03 mean on my bora PURU Cooktop?
If 'E03' is displayed, it indicates there might be an object on the operating panel. Remove any objects from the panel. Alternatively, the operating panel might be dirty, so try cleaning it.
What does 'E' mean in the fan display of my BORA Cooktop?
If 'E' is shown in the fan display, it could mean that Home-In is not authorized, in which case you should open the window. It could also indicate that the safety device is defective.
What does E8 mean on my bora PURU fan display?
If 'E8' is shown in the fan display, it could be due to the use of a phase-separating window contact switch. Try opening the window.
What does E2 mean on my bora PURU?
If 'E2' is shown in the cooking zone, it means that the overheating protection has tripped.
How to fix the lock symbol being brighter on my bora PURU?
If the lock symbol is brighter than the other indicators, the childproofing feature is activated. Switch off the childproofing feature.
Why has the extraction performance of my bora PURU Cooktop extractor decreased?
The extraction performance might have decreased because the grease filter is extremely dirty. In this case, you should clean or replace the grease filter. Another possible reason is that the activated charcoal filter is extremely dirty. If this is the case, replace the activated charcoal filter (only with PURU models).
What does it mean when my BORA Cooktop displays the symbol?
The symbol is displayed when there is no or unsuitable cookware on the cooking zone. Use suitable cookware and select the cookware size depending on the cooking zone.
Why does my BORA Cooktop power setting shut off prematurely?
The power setting may shut off prematurely because the overheating protection has tripped.
What to do if there is an object in the air guiding housing of my bora PURU?
Remove the object.
Identifies intended users and their necessary skills for operating and installing the appliance.
Clarifies that instructions apply to multiple versions and may not cover all features.
Emphasizes adherence to other provided documents alongside these instructions.
Explains the consistent use of formatting, symbols, and safety information for clarity.
Core safety advice for appliance use, installation, and user responsibilities to prevent injury and damage.
Critical safety measures during appliance operation, covering cooktop and extractor use.
Mandatory safety guidelines for installing the appliance, including electrical and general setup.
Safety protocols for decommissioning, dismantling, and environmentally friendly disposal of the appliance.
Details energy usage figures for individual cooking zones and the total appliance consumption.
Provides technical data for the PURA model's exhaust air extraction system, including flow volume.
Details technical data for the PURU model's recirculation air system, including flow volume.
Specifies the capacity and service life of the recirculation filter for the PURU model.
Presents the appliance's energy efficiency class and data according to relevant EU directives.
Introduces the PURA/PURU models and illustrates the main components of the cooktop extractor.
Explains the central touch operating panel, its sensor buttons, and the basic principles of control.
Details how the cooktop and extractor work, including induction, power levels, and operational features.
Describes various built-in safety features like display lock, childproofing, and automatic shut-down mechanisms.
Instructions for verifying the delivery contents and listing the necessary tools for installation.
Guidance on assembly, including safety clearances and preparing the worktop cut-out.
Specific installation steps for the PURU recirculation and PURA exhaust air versions of the appliance.
Procedures for establishing the electrical power connection and performing initial setup and configuration.
Overview of basic operating principles, touch commands, and general usage guidelines.
Covers essential system operations like switching on/off, display/cleaning locks, and pause/timer functions.
Details on setting fan power levels, automatic extractor functions, and switching the fan off.
Explains selecting cooking zones, power levels, automatic heat-up, power setting, and warming functions.
Guides on accessing and configuring various settings through the user menu.
Specifies recommended cleaning frequencies for components and lists suitable cleaning agents.
Step-by-step instructions for cleaning the cooktop surface, including handling hot residues.
Details on cleaning the air inlet nozzle, grease filter, and related components of the extractor.
Instructions for cleaning the air guiding housing and replacing the activated charcoal filter.
Addresses problems related to power supply, fuses, and incorrect cookware use.
Covers issues with childproofing, automatic shut-off, and interpreting error codes.
Troubleshoots fan performance, dirty filters, and indicates filter service life status.
Procedures for safely shutting down, disconnecting, and dismantling the appliance.
Guidelines for proper disposal of packaging and old appliances, emphasizing recycling.
Details the terms, conditions, exclusions, and extension options for the BORA product warranty.
Information on contacting BORA service and specialist suppliers for assistance and repairs.
Guidance on obtaining original spare parts and a list of available accessories for the appliance.
A comprehensive list of optional accessories for the cooktop and extractor, including special items.
To Next Page
General
