bora PURU - Function Test

EN
33
Installation
www.bora.com
Fig. 6.38 Display Menu item B: Conguring the extraction
system
 Select the corresponding operating mode (tap the
corresponding segment on the slider ).
 Confirm and save the setting by moving to the next
menu item (tap the multi-function display/indicator
b
).
Menu item C: Power management
The total appliance power can be reduced if the required
electrical power cannot be provided at the installation
site.
INFO The cooking zone power restrictions automatically
implemented by the appliance are determined
according to the total power set.
There are two operating modes to choose from:

Operating mode
1
: One-phase connection

Operating mode
2
: 3-phase connection (factory
setting)
Fig. 6.39 Display Menu item C: Power management
 Select the corresponding operating mode (tap the
corresponding segment on the slider ).
 Confirm and save the setting by moving to the next
menu item (tap the multi-function display/indicator
C
).
Menu item D: Demo mode
The appliance can be set to demo mode, which includes
all operating functions, but the heating function of the
cooktops is deactivated.
INFO Pan size recognition is deactivated in demo mode.
Fig. 6.40 Display Menu item D: Demo mode
 Tap the top slider segment

The demo mode symbol
d
is displayed on all cooking
zones for one second.

o
n
is displayed.
 Confirm and save the setting by moving to the next
menu item (tap the multi-function display/Indicator
d
).
Closing the dealer and service menu
When you have been through all of the basic configuration
menu items:
 Long press on the multi-function display.

The standard display appears.
6.9.2 Function test
 Carry out a thorough function test on all devices.
 In the event of error messages, see the
Troubleshooting” chapter.