is displayed.
Move to another menu item or close the menu.
The childproofing feature is permanently activated.
Permanently deactivating the childproofing feature
Tap the bottom slider segment
Move to another menu item or close the menu.
The childproofing feature is permanently deactivated.
7.6.3 Menu item 3: Showing and resetting
the filter status (only in recirculation
mode)
INFO If menu item 3 is called up, the filter status will be
automatically shown.
Fig. 7.4 Menu item 3: Show and reset lter status
Resetting the filter status:
long press on the fan button .
All slider elements are once again displayed at 100%
brightness.
Move to another menu item or close the menu.
Menu item 4: Duration of the automatic after-
run function
INFO The duration of the automatic extractor function
can be set using menu item 4.
There are three times to choose from:
20 minutes
15 minutes
10 minutes
7.6.1 Menu item 1: Volume of the acoustic
signals
INFO The current set volume is shown in the rear, left-
hand cooking zone display when the menu item is
called up.
Fig. 7.2 Menu item 1: Volume of the acoustic signals
Setting the acoustic signal volume:
Swipe
upwards or downwards until the required
volume is reached.
Move to another menu item or close the menu.
7.6.2 Menu item 2: Childproofing feature
INFO With menu item 2 the childproofing feature can
be permanently switched on or off. This setting is
adopted for each new cooking session.
Fig. 7.3 Menu item 2: Childproong feature
To Next Page
Loading...
