DANGER!
Fire risk from flambéing!
While the cooktop extractor is working,
it sucks up grease from cooking.
Flambéing food can cause the grease
to catch re.
Clean the cooktop extractor
regularly.
Never work with a naked flame while
the cooktop extractor is running.
DANGER!
Fire risk from fat deposits!
If the stainless steel grease lter is
not cleaned regularly, this can lead to
increased levels of grease in it. This
increases the re risk.
Clean and replace the filter at
regular intervals.
CAUTION!
Exposed parts may become hot!
The cooktop extractor and its exposed
parts are hot when the cooking zone
is switched on and during the cooling
phase.
Do not place any items on the
cooktop.
Please use suitable tools (pot
holders, oven gloves).
WARNING!
Risk of injury when opening the
bottom housing cover!
There is a risk of injury while the fan is
turning.
Switch off the cooktop extractor and
the cooktop.
Turn off the mains supply.
CAUTION!
Damage caused by objects or paper
suctioned in!
Small and light items, such as cleaning
cloths made from material or paper,
can be suctioned into the cooktop
extractor. This can damage the fan or
impair the exhaust performance.
Do not store any items or paper on
the cooktop extractor.
CAUTION!
Damage caused by grease and dirt
deposits!
Grease and dirt deposits can prevent
the cooktop extractor from functioning
properly.
Never use the cooktop extractor
without a stainless steel grease
filter.
2.3 Safety Instructions – Installation
The appliance must only be installed and
assembled by trained specialists who are familiar
with and comply with the standard national
regulations and supplementary regulations of the
local utility companies.
Work on electrical components must be
conducted by trained electrical personnel.
The electrical safety of the appliance is only
guaranteed if it is connected to a protective
conductor system that has been installed in line
with regulations. Ensure that this basic safety
precaution is met.
Cooktop
DANGER!
Risk of electric shock!
Connecting the appliance to the mains
incorrectly poses a risk of electric
shock.
Make sure that the appliance has a
fixed connection to the mains
voltage.
Make sure that the appliance is
connected to a properly installed
protective conductor system.
Make sure that technical equipment
is provided to enable all of the
appliance’s poles to be disconnected
from the mains with a contact
opening width of at least 3 mm (LS
switch and automatic circuit
breakers, fuses, contactor).
To Next Page
Loading...
Need help?
General
