The warming symbol is shown next to the cooking
zone.
Deactivating the warming function
Tap the required cooking zone.
Tap the warming button
or
swipe right down to the bottom (power level 0)
The warming function is deactivated.
Selecting a power level also deactivates the warming
function.
7.5.6 Cooking zone timer
INFO To be able to activate the timer function, a
cooking zone power level must first be set.
INFO The timer function can be used for each cooking
zone. Several timers can be activated at the same
time (multi-timer).
Activating cooking zone timers
Tap on a cooking zone
The additional cooking zone functions are displayed.
If the chosen cooking zone is not yet active (= power
level
).
Setting the time
Select the desired power level:
Command Increase time Decrease time
Swipe
upwards downwards
Tap
(exact to the minute)
(exact to the minute)
Tab. 7.3 Setting the time
The timer symbol starts to flash.
Starting the timer
Tap the flashing timer button
The set time starts to count down.
The timer symbol is shown next to the cooking
zone.
The operating panel display switches to the standard
display after 2 seconds.
10 seconds before the set time lapses, the system
flashes the remaining time.
In the last 5 seconds of the countdown an acoustic
signal can be heard every second.
Reducing the power level
Tap the required cooking zone.
Tap a lower position on the slider
or
swipe downwards to the required power level
or
tap until the required power level is reached.
7.5.3 Automatic heat up function
INFO The system automatically determines the heating
time depending on the power level set.
Activating the automatic heat up function
tap on the required cooking zone
Adjusting the power level
Long press on the slider at a position lower
than power level 9
The automatic heat up function is activated.
Whilst the automatic heat up function is active, the
power level displayed will flash.
When the heat up time has ended, the cooking zone
will stay on the previously set power level (continuous
cooking level).
Deactivating the automatic heat up function early
The automatic heat up function is deactivated early if a
lower power level is set.
INFO If the power level of a cooking zone is increased
when the automatic heat up function is active, the
automatic heat up function remains active. The
time is restarted for the new continuous cooking
level. If the cooking zone power level is decreased
while the automatic heat up function is active, the
automatic heat up function is deactivated.
7.5.4 Cooktop power setting
Activating the power setting for a cooking zone
Tap on when power level 9 is active.
appears in the cooking zone display.
INFO After 5 minutes, the power setting is automatically
switched back to power level 9.
Deactivating the power setting
The power setting is deactivated early if another power
level is set (see Setting the power level).
7.5.5 Setting the warming level
Activating the warming level
Touch auf die gewünschte Kochzone
The additional cooking zone functions appear.
Tap the warming button
The warming level is activated.
To Next Page
Loading...
