bora S Pure User Manual (English)

Questions and Answers:

S
Sarah BakerAug 17, 2025
How to fix a BORA Cooktop that won't turn on?
- D
  Daniel ClarkAug 17, 2025
  If your BORA cooktop or the fan cannot be switched on, the issue might be with the electrical wiring system. Check the fuse or automatic circuit breaker in your apartment or house. If the fuse is defective, replace it. If the automatic circuit breaker has tripped, switch it back on. If the fuse/automatic circuit breaker trips several times, contact the BORA Service Team. If the power supply is disconnected, have a specialist electrician inspect it.
R
richard76Aug 19, 2025
What does error E 03 mean on my BORA Cooktop and how do I fix it?
- M
  Michael JenkinsAug 20, 2025
  If 'E 03' is displayed (with 'E' in the fan display and '03' in the rear cooking zones), there may be an object on the operating panel. Remove the object. Alternatively, the operating panel may be dirty; in this case, clean the operating panel.
W
williamgonzalezAug 22, 2025
What does 'E' mean on my bora S Pure fan display?
- S
  Samuel IngramAug 22, 2025
  If 'E' is shown in the fan display of your BORA cooktop, it could be that Home In is not authorised, so try opening the window. Alternatively, the safety device may be defective, in which case you should contact the BORA Service Team.
S
smithkevinAug 26, 2025
What does E8 mean on my bora S Pure fan display and how to fix it?
- D
  dolsonAug 26, 2025
  If 'E8' is shown in the fan display of your BORA Cooktop, it indicates the use of a phase-separating window contact switch. Try opening the window.
A
Ashley SullivanAug 28, 2025
Why is the lock symbol lit on my BORA Cooktop?
- J
  Jason GuerraAug 28, 2025
  If the lock symbol is brighter than the other indicators on your BORA cooktop, the childproofing feature is activated. To resolve this, switch off the childproofing feature.
M
Matthew SteeleAug 31, 2025
What does 'F' mean on my bora S Pure fan display (PURSU only)?
- C
  cohenjenniferAug 31, 2025
  If 'F' is shown in the fan display of your BORA cooktop (PURSU only), it could mean that the cooktop extractor is defective or a cable connection has become loose, in which case you should contact the BORA Service Team. Alternatively, it may indicate that the end of the activated charcoal filter service life has been reached, so insert a new activated charcoal filter.
L
Lauren WarrenSep 2, 2025
Why has the extraction performance of my bora S Pure Cooktop extractor decreased?
- J
  Julie WoodsSep 2, 2025
  If the extraction performance of your BORA cooktop extractor has decreased, it might be due to a dirty grease filter. Try cleaning or replacing it. Another possible reason is a very dirty activated charcoal filter, in which case you should insert a new one. Also, check for any objects, like a cleaning cloth, in the air guiding housing and remove them.
R
ryan42Sep 5, 2025
Why is 'v' displayed on my BORA Cooktop cooking zone?
- G
  gina97Sep 5, 2025
  If 'v' is displayed in the cooking zone display of your BORA cooktop, it means there is no or unsuitable cookware on the cooking zone. Use suitable cookware and select the cookware size depending on the cooking zone.
H
Heather RodriguezSep 8, 2025
Why does my bora S Pure Cooktop automatically shut off?
- A
  Ashley HallSep 8, 2025
  If a cooking zone or the entire BORA cooktop switches off automatically, it means the maximum cooking zone operating time has been exceeded. To resolve this, put the cooking zone back into operation.
B
Brittany PowellSep 12, 2025
Why does the bora S Pure fan keep running after I turn it off?
- J
  Jordan Bailey Jr.Sep 12, 2025
  If the cooktop cooling fan continues to run when the BORA cooktop has been switched off, wait until the cooling fan switches off automatically.

bora S Pure Specifications

General

Number of Cooking Zones	4
Control Type	Touch control
Power Levels	9
Frequency	50/60 Hz
Type	Induction
Supply Voltage	220-240 V
Safety Features	Child Lock
Installation Type	Built-in