Installation
EN
146 bora.com
u
Select the corresponding operating mode (tap the
corresponding segment on the slider ).
u
Confirm and save the setting by moving to the next
menu item (tap the multi-function display/indicator
).
Fig.9.44
Display Menu item B: Configuring the
extraction system
9.9.3
Menu item C: Power
management
The total appliance power can be reduced if the
required electrical power cannot be provided at the
installation site.
There are three operating modes to choose from:
Power
management
Connection
Maximum
power
consumption
Fuse
protection
C3 three-phase 7250 W 3 x 16 A
C3 two-phase 7250 W 2 x 16A
C3 single-phase 7250 W 1 x 32 A
C2 single-phase 4400 W 1 x 20 A
C1 single-phase 3600 W 1 x 16A
Tab.9.4
Power management
u
Select the corresponding operating mode (tap the
corresponding segment on the slider ).
u
Confirm and save the setting by moving to the next
menu item (tap the multi-function display/indicator
).
The cooking zone power restrictions
automatically implemented by the appliance are
determined according to the total power set.
Fig.9.45
Display menu item C: Power management
9.9.4
Menu item D: demo mode
The appliance can be set to demo mode, which includes
all operating functions, but the heating function of the
cooktops is deactivated.
u
Tap the top slider segment.
T
The demo mode symbol is displayed on all
cooking zones for one second.
T
is displayed.
u
Confirm and save the setting by moving to the next
menu item (tap the multi-function display/indicator
).
Closing the dealer and service menu
When you have been through all of the basic
configuration menu items:
u
long press on the multi-function display.
u
The standard display appears.
Pan size recognition is deactivated in demo
mode.
To Next Page
Loading...
Need help?
General
