Functions and operation
EN
bora.com 117
T
The setting is saved until another change is made on
the appliance.
Preparing the espresso pot
u
Fill the bottom chamber with cold water to just below
the safety valve.
u
Insert the filter funnel.
u
Fill the filter funnel to the brim with ground coffee
and level it
T
without pressing down the coffee.
u
Screw the top chamber firmly onto the base.
T
Both chambers must be screwed together tightly.
u
Put the espresso pot on the cooking zone.
Activating the coffee function
u
Tap the required cooking zone.
T
The additional cooking zone functions are displayed.
u
Tap the heat retention button twice.
T
flashes in the cooking zone display.
T
The set fill quantity is shown for 2 seconds in the fan
display and in the slider.
Starting the coffee function
The function can be started as long as the fill quantity is
shown in the fan display.
u
Tap the indicator .
T
The remaining time is shown in the multi-function
display.
T
The operating panel display changes to the standard
display after 2 seconds.
T
The heat retention symbol and the timer symbol
are shown next to the cooking zone.
Time lapsed
T
10 seconds before the time lapses, the system
flashes the remaining time.
T
In the last 5 seconds of the countdown an acoustic
signal can be heard every second.
T
The time indicator changes to the fan power
level.
T
Once the time has lapsed the cooking zone is
automatically deactivated (= power level 0).
The coffee function is active and the time counts down:
u
Tap the indicator .
T
The remaining time is shown for 2 seconds in the
multi-function display.
Hints and tips
Coffee is ready too early:
T
The filled water quantity is too low.
T
The set water quantity is to high.
T
The ground coffee is too coarse (the coffee may
taste watery).
T
The filled water is too warm. If no cooler water is
available, slightly reduce the set water fill quantity.
T
The filter funnel is not filled to the brim with ground
coffee.
Some of the coffee doesn’t run through:
T
The filled water quantity is too high.
T
The water quantity is too low.
T
The ground coffee is too fine (the coffee may taste
bitter).
T
The espresso pot wasn’t screwed together tightly.
T
The filter funnel contains too much coffee or the
ground coffee is compressed.
The running time may vary slightly between the
two cooking zones.
5.6.10
Switching off the
cooking zone
u
Tap the required cooking zone.
u
Swipe right down to the bottom until appears in
the cooking zone display
or
u
long press on the cooking zone
T
is displayed in the cooking zone display.
T
After 2 seconds, the standard display appears.
or
u
tap until appears in the cooking zone display.
5.7
Safety features
5.7.1
Child lock
The child lock prevents the appliance from being
switched on accidentally.
T
After switching on the appliance, the lock symbol
lights up in the operating panel display.
Permanently activating/deactivating the child
lock
(see"6.2Menu item 2: Child lock")
Deactivating the child lock for a cooking
session
u
Long press on the lock button .
To Next Page
Loading...
