Appliance description
EN
bora.com 107
4.2.4
7-segment display
Multi-function display Meaning
Fan display
‑
Power levels
Power setting
Inactive
Automatic extractor
function
Automatic after-run
Filter service display
Multi-function display Time indication
e.g.
Error code
Cooking zone indicator Meaning
Cooking zone
indicator
‑
Power level
Power setting
Heat retention level
Coffee function
Pan size recognition
Inactive
Residual heat indicator
(cooking zone is switched
off but still hot)
Error
Tab.4.3
Meaning of the 7-segment displays
4.2.5
Lighting
The operating panel has 2 different levels of
lighting (100% and 50%).
On principle the system adapts the lighting to
the current operating scenario. Relevant display
elements are more brightly lit and irrelevant
ones are dimmed. Unavailable functions are
faded out.
Lighting Use
100% Function is active and selected
50% Function is inactive and can be selected
0% Function is unavailable
Tab.4.4
Lighting
4.2.6
Sounds
The volume of the acoustic signals can be set in
the menu (0% to 100% ).
The acoustic signal for the power button cannot
be set to 0.
Safety-relevant acoustic signals are always
emitted with the volume at 100%.
The system basically differentiates between two
different types of acoustic signals:
Acoustic signal Purpose
Short beep (0.25 s ) Confirmation of a selection
Sequence of beeps Interaction required
Tab.4.5
Sounds
4.3
How the cooktop
extractor works
Depending on the model you purchased, the cooktop
extractor can be operated as an exhaust air or a
recirculating air version.
Exhaust air
The air suctioned away is purified by the grease filter
and expelled into the open air via a duct system.
The exhaust air must not be expelled into:
T
a smoke or exhaust gas flue that is in operation
T
a shaft used for the aeration of rooms where
fireplaces are installed.
If the exhaust air is to be directed into a smoke or
exhaust gas flue that is not in use, the installation must
be checked and approved by the responsible heating
engineer.