Functions and operation
EN
118 bora.com
T
The standard display lights up and the operating
panel is reactivated.
5.7.2
Residual heat indicator
If a cooking zone is still hot after switching off, there is a
risk of burns or fire. While is displayed for a cooking
zone (residual heat indicator), do not touch the cooking
zone or place any heat-sensitive objects on top of it.
T
is shown at 100% brightness: very high
temperature.
T
is shown at 50% brightness: high temperature.
The display goes out after a sufficient cooling time
(temperature < 55°C).
5.7.3
Safety shut-down
Cooktop extractor
The cooktop extractor switches to automatic mode after
120min if there has been no input or changes to the
power level.
Cooktops
Each cooking zone is automatically switched off after a
predefined operating time in which the power level has
not been changed. 3 levels are available to set the time
until safety shut-down.
T
Safety shut-down is preset to level 2.
T
The level can be changed in the user menu.
Power levels Safety shut-down after hrs:min.
Level 1 Level 2 Level 3
12:00 8:24 6:00
10:00 6:24 4:00
9:00 5:12 2:30
8:00 4:12 2:00
6:00 3:18 1:30
4:00 2:12 1:00
4:00 2:12 1:00
3:00 1:48 0:45
2:00 1:18 0:30
0:05 0:05 0:05
Tab.5.8
Safety shut-down on the different power
levels
Power level Safety shut-down after hrs:min.
Level 1 Level 2 Level 3
12:00 8:00 4:00
Tab.5.9
Safety shut-down on the different heat
retention levels
u
Switch the cooking zone back on if you want to put
the cooking zone back into operation.
5.7.4
Overheating protection
In the event of overheating, the cooktop power
is reduced or the appliance is switched off
completely.
The appliance is fitted with overheating protection. The
overheating protection can be triggered if:
T
cookware is heated up empty;
T
oil or fat is heated on high power;
T
a hot cooking zone is switched on again after a
power cut.
Whilst the overheating protection is active, one of the
following steps is taken:
T
the activated power setting is switched back to the
previous level;
T
the power setting can no longer be switched on;
T
the set power level is reduced;
T
the cooktop switches off completely.
After a sufficient cooling period, the cooktop can be
used again in full.
To Next Page
Loading...
Need help?
General
