bora PUXU - Minimum Unit Dimensions for Pure (PURA, PURU); Worktop Cut-Out; Pure Cut-Out Dimensions (PUXA, PUXU); Pure Flush Installation (PUXA, PUXU)

EN
24
Installation
www.bora.com
6.5.1 X Pure cut-out dimensions
(PUXA, PUXU)
X Pure flush installation (PUXA, PUXU)
x
834 ±2
810 ±2
519 ±2
≤ R5
≤ R5
≥50
(≥50)
495 ±2
≥ 600
Fig. 6.7 Cut-out dimensions for ush installation
7 +0,5
12
10 - 40
Fig. 6.8 Rebate dimensions for ush installation
X Pure surface mounting (PUXA, PUXU)
x
810 ±2
≤ R5
≥ 50 (≥ 50)
495 ±2
≥ 600
Fig. 6.9 Cut-out dimensions for surface mounting
10
10 - 40
Fig. 6.10 Overlay dimensions for surface mounting
6.4.3 Minimum unit dimensions for Pure
(PURA, PURU)
≥600
199
≥800
Fig. 6.5 Pure minimum unit dimensions
6.5 Worktop cut-out
i
All dimensions are shown from the front edge of the front
cover.
Worktop overhang
≥50x
Fig. 6.6 Worktop overhang
XX
Please note the worktop overhang x when creating the
worktop cut-out. Applies to flush installation and surface
mounting.
XX
Create the worktop cut-out taking into account the specified
cut-out dimensions.
XX
Make sure that the cut surfaces of the worktops are properly
sealed.
XX
Comply with the instructions of the worktop manufacturer.