Activated when the UPS has bypass output.
Activated by >100ms pulse, the UPS turns off when
UPS is on inverter; the UPS turns on when UPS is
not on inverter. It is the same as a remote button to
control UPS On/Off status.
Activated by >100ms pulse, the UPS will turn to
bypass mode and warning when it is activated, just
like maintain switch action. The warning would
disappear if the trigger pulse disappeared for one
second.
9.4 Intelligent slot
This series is equipped with an intelligent slot for other optional card to
achieve remote management of the UPS through internet / intranet.
Please contact your local distributor for further information.
To Next Page
Loading...
Need help?
General