Bosch 2600 Series - Page 17

LTC 2600 Series | Instruction Manual | Multiplexer Set (MS) Commands
Bosch Security Systems | July 12, 2004
EN
|
17
MS-MON-BORDERS <brightness>
This command specifies the border brightness for
cameos shown on monitor A during multi-screen
displays.
Parameter values for <brightness> are:
0Transparent
1 Black
2-6 Grey*
7 White
*NOTE: All grey values (2-6) will set an identical grey
value which will be returned as 2.
MS-MON-LARGE-TEXT <text-bright>
<background-bright>
MS-MON-SMALL-TEXT <text-bright> <background-
bright>
This command specifies the text brightness and
background outline brightness (whether large or small)
for Parameter values for <text-bright> and
<background-bright> are:
Transparent 1
Black 1
Grey 2
White 8
MS-MON-TEXT <brightness> <brightness>
This command sets the foreground and background
brightness (respectively) for all text on all monitors.
Parameter values for <brightness> are:
0Transparent
1 Black
1 Grey
2 7 White
MS-MON-TEXT-ENABLE <monitor> <boolean>
This command enables or disables text display for the
specified monitor.
Parameter values for <monitor> and <boolean> are:
<monitor> 1 Monitor A
2Monitor B
<boolean> 0 Disables
1 Enables
MS-MON-TIME-DATE-FORMAT <time-format>
<date-format>
This command sets the formats for the time and date
displayed on the monitor.
NOTE: The time and date formats can also be set
using the DATE/TIME General commands.
Parameter values for <time-format> and <date-format>
are:
<time-format> 12 12 hr. mode
24 24 hr. mode
<date-format> 1 MM DD YY
2DD MM YY
3 YY MM DD
1 2 3
4 5 6
7 8 9
1
1 2
3 4
3
6 7
1 2
4 5
9
1 2
5 6
3 4
7 8
1011
1213
1 2
5 6
3 4
7 8
11 1 2
1516
9 10
1314
9 10
1 2
5 6
3 4
7 8
mode = 0
Full Screen Mode
mode = 1
2 x 2 Mode
mode = 3
4 + 3 Mode
mode = 5
4 x 4 Mode
mode = 2
3 x 3 Mode
mode = 4
12 + 1 Mode
mode = 6
6 + 2 Mode