Bosch 3 842 999 898 - Scope of Delivery; Condition on Delivery; About this Product; Specifications

Scope of delivery 11/40
3 842 563 815/2021-11, MIT: BS 1/…, Bosch Rexroth AG
4 Scope of delivery
The scope of delivery includes the following:
• 1 belt section BS1/...
• 1 gear motor with fastening material
• 1 Assembly instructions "BS1/..., belt section".
Necessary accessories such as leg sets, fastening set for the connection to other
belt sections or the floor must be ordered separately, see sales catalog TS1 plus.
4.1 Condition on delivery
• Ready to assemble on the pallet
5 About this product
5.1 Specifications
5.1.1 Using belt section BS1/...
• Longitudinal conveying of the WT1 workpiece pallet on conveyor sections of
upto5000 mm.
• Transverse conveying of the WT1 workpiece pallet between parallel conveyor
sections (in connection with two HQ1 lift transverse units).
5.1.2 Design of belt section BS1/...
• Ready-to-use conveyor section.
• Section load: see Technical Data on page 36.
• Conveyor medium:
– BS1/... : Toothed belt.
• Depending on the version, motor mounting on the right-hand side (MA = R),
left-hand side (MA = L) or in the center (MA = M).
• Cable/plug or terminal box motor connection.
5.2 Identification of the product
Fig. 1: Nameplate
....... ..........
....
....
.........
.................
........
A
C
B
Typschild
A: Material number
(order number)
B: Designation
C: Information on
the version and
dimensions
ENGLISH