Commissioning 23/40
3 842 563 815/2021-11, MIT: BS 1/…, Bosch Rexroth AG
8.2 Residual risks
Table 8: Residual risks
Location Situation Hazard Action
1 Conveyor medium pinch
point
Pieces of clothing or
longhair can be pulled in
Crushing, pulling
out of hair
Do not reach into the system while it is
running. Wear protective clothing.
2 Cross connector,
driveshaft, gear:
between component and
workpiece pallet
Trapping of body parts
Shearing Do not reach into the system while it is
running.
In the work area OR at transport speeds
v > 15 m/min, a constructive solution,
e.g.asafety fence, is required.
3 Conveyor medium:
between running
conveyor and stationary
workpiece pallet
(e.g.during separation)
Trapping of body parts
Crushing Do not reach into the system while it is
running.
4 Between workpiece
pallets
Body parts can be
crushed
Crushing Do not reach into the system while it is
running.
In the work area or at transport speeds
v > 15 m/min, a constructive solution,
e.g.separation of the workpiece pallets,
isrequired.
5 End of belt section Crushing injury to body
parts caused by falling
objects
Crushing A constructive solution is required,
e.g.bymeans of astopper.
8.3 Re-commissioning after astandstill
Follow the steps outlined for the initial commissioning.
ENGLISH