Bosch 3 842 999 898 - Replacement of wear parts

Maintenance and repair 27/40
3 842 563 815/2021-11, MIT: BS 1/…, Bosch Rexroth AG
Fig. 15:
563814-07
1
5
2
4
3
Oiling the toothed belt
10.3.2 Bearings
The bearings have lifelong lubrication and are maintenance-free under normal
conditions of use.
10.3.3 Gear
The gears are maintenance-free under normal conditions of use.
10.3.4 Motor
To ensure adequate cooling of the motors, regularly remove dirt and dust deposits:
• from the surface of the motor,
• from the intake openings on the fan hood,
• from between the cooling ribs.
The cleaning intervals depend on the ambient and operating conditions.
10.4 Replacement of wear parts
Required tools
• Hex wrench SW13.
• Hex socket wrenches SW3, SW4, SW5.
• Phillips screwdriver PH2
• Caliper, 500mm
• Hammer
• Drift punch
ENGLISH