Bosch 3 842 999 898 - Safety instructions; Intended use; Improper use

Safety instructions 7/40
3 842 563 815/2021-11, MIT: BS 1/…, Bosch Rexroth AG
1.3.4 Abbreviations
This document uses the following designations:
Table 5: Abbreviations
Abbreviation Meaning
WT 1/... Workpiece pallet from the Rexroth TS 1 transfer system
SZ 1/... Leg set
HQ 1/... Lift transverse unit
2 Safety instructions
2.1 About this section
The product has been manufactured in accordance with the generally accepted
rules of current technology. Nevertheless, there is arisk of personal injury and
property damage if you do not read this sectionand follow the safety instructions
in this document.
 Read this documentation carefully and completely before you start working with
the product.
 Keep the documentation accessible to all users at all times.
 Always include them when giving the product to athird party.
2.2 Intended use
The product is apartly completed machinery.
You may use the product as follows:
• For installation in aRexroth TS1 transfer system
• For transporting Rexroth WT1 workpiece pallets
• Maximum load/sectionload: See technical data on page36.
• For ambient conditions, seepage36.
The product is strictly intended for professional use and not for private use.
The intended use also includes having read and understood these instructions,
especially section2 "Safety instructions".
2.3 Improper use
Any use other than that described in the section"Intended use" is considered
improper and is not permitted.
BoschRexrothAG is not liable for any damage resulting from improper use.
Theuseralone bears any risks associated with improper use.
The following foreseeable misuses also constitute improper use:
• Transporting goods other than those specified.
• Transporting people on the product or transported material.
• Persons climbing onto the product
– Do not climb on the product.
• Private use.
ENGLISH