K
kentkellySep 10, 2025
Why is the angle of cut not accurate on my Bosch Saw?
- DdanielweaverSep 12, 2025
If the angle of cut is not accurate on your Bosch Saw, it may be due to misalignment. Refer to the Adjustments section for guidance.
To Next PageTo Next PageWhy is the angle of cut not accurate on my Bosch Saw?
If the angle of cut is not accurate on your Bosch Saw, it may be due to misalignment. Refer to the Adjustments section for guidance.
Why Bosch 4405 head assembly does not move to 45º bevel position?
If the head assembly of your Bosch Saw does not move to the 45º bevel position, the 33.9º Bevel detent may be engaged. Rotate the detent to the non-use position.
General| Blade Diameter | 10 inches |
|---|---|
| Power Source | Corded Electric |
| Motor Amperage | 15 Amps |
| Spindle Lock | Yes |
| Depth of Cut at 45° | 2-1/4 inches |
| Maximum Cutting Depth | 70 mm |
| Arbor Size | 5/8 inches |
| No Load Speed | 5000 rpm |
| Depth of Cut at 90° | 70 mm |
Essential safety guidelines for operating bench top tools, covering work area and personal safety.
Guidelines for safe use of electrical components and power supply to prevent shock hazards.
Proper techniques for using and maintaining the tool safely, including blade care and guards.
Critical safety instructions tailored for the operation of miter saws to prevent accidents.
Understanding double insulation and proper selection and use of extension cords for safety.
Information on required electrical circuits and the function of the saw's electric brake system.
Locating and understanding the function of primary parts like switches, locks, guards, and fences.
Details on less common but important components such as depth stops, clamp positions, and adjusters.
Lists necessary tools for assembly and guides on unpacking and verifying all parts are present.
Step-by-step instructions for attaching specific parts like the miter lock knob and dust collection system.
Detailed guide on how to safely install and remove the saw blade, including hardware.
Procedures to ensure the blade is perfectly square to the table at 0° and 90°.
Steps to accurately set and calibrate the 45° bevel angle for precise cuts.
Procedure to accurately set and calibrate the 33.9° bevel angle for specific cuts.
Ensuring the blade is square to the fence and calibrating the miter scale indicator.
Instructions for securely mounting the miter saw to a workbench or stand.
Adjusting the stability bar and using clamps for portable mounting to ensure stability.
Guidance on maintaining correct body posture and safe hand placement during operation.
Techniques for properly supporting and clamping workpieces for stable and safe cutting.
Instructions for utilizing auxiliary fences, switch activation, and detent overrides.
Procedures for extending the base and adjusting the sliding fence for various cuts.
Detailed steps for performing basic chop cuts and slide cuts on the miter saw.
Instructions for executing miter and bevel cuts accurately and safely.
Guidance on performing compound cuts and cutting grooves (dadoes).
Specific techniques for cutting base molding and crown molding accurately.
Methods for safely cutting bowed or irregularly shaped workpieces.
Essential procedures for servicing, cleaning, and maintaining the saw and its blades.
Guidance on proper lubrication practices and information regarding the tool's bearings.
Diagnosing and resolving issues related to the saw's electrical components and power.
Solutions for common problems encountered during saw operation, including alignment and movement.
Instructions for adjusting the slide action and bevel lock lever for optimal performance.
Overview of various saw blades and optional accessories designed to enhance tool functionality.
