Bosch 7000 HD - Page 9

6
175
6.9
193
7.6
5
236
9.3
203
8.0
133.4
5.25
133.4
5.25
219.1
8.63
178
7.0
38
1.5
mm
in.
152.4
6.0
1-1/2 NPT
69.9
2.75
101.6 Typ.
4.0
10.4
8 x 0.41
114.3
4.50 Typ.
228.6
9.0
279.4
11.0
1022.4
40.25
976.1
38.43
88.1
3.47
1190.8
46.88
616
24.25
346.2
13.63
58
2.3
11.0
04.3
216.4
8.52
170.0
6.69
134.6
5.30
160.0
6.30
50.8
2.00
105.0
4.13
Ø 10.4
0.41
16.0 Typ.
0.63
111 Typ.
4.37
6.35 Typ.
0.25
279.4
11.00
6.35
0.25
378
14.88
254
10.00
88.9
3.50
88.9
3.50
10.2
0.40
AUTODOME Dimensions - Mounts
1 Mast Mount 4 Roof Mount
2 Corner Mount 5 Roof Mount Adapter
3 Pipe Mount 6 Power Supply for Pipe and
Roof Mounts
Ordering information
AUTODOME 7000 HD 20x In-ceiling
Order number VG5-7220-CPT4
AUTODOME 7000 HD 20x Indoor/Outdoor Pendant
Order number VG5-7220-EPC4
Accessories
NPD-6001A High PoE Midspan 60W, single port, AC in
High Power, 60 W Single Port PoE Midspan with AC in
Order number NPD-6001A
VG4-A-PSU0 24 VAC Power Supply Unit
24 VAC, 100 W, white, for an AutoDome Series camera
Order number VG4-A-PSU0
VG4-A-PSU1 120 VAC Power Supply Unit
120 VAC, 100 W, white, for an AutoDome Series
camera
Order number VG4-A-PSU1
VG4-A-PSU2 230 VAC Power Supply Unit
230 VAC, 100 W, white, for an AutoDome Series
camera
Order number VG4-A-PSU2
VG4-A-PA0 Pendant Arm Mount
Pendant arm mount with power supply box for a
AutoDome Series cameras, no transformer, white
Order number VG4-A-PA0
VG4-A-PA1 Pendant Arm Mount with 120 VAC Trans-
former
Pendant arm mount with power supply box for
AutoDome Series cameras with a 120 VAC
transformer, white
Order number VG4-A-PA1
VG4-A-PA2 Pendant Arm Mount with 230 VAC Trans-
former
Pendant arm mount with power supply box for
AutoDome Series cameras with a 230 VAC
transformer, white
Order number VG4-A-PA2
VGA-PEND-ARM Pendant Arm with Wiring
Compatible with an AutoDome Series pendant housing
Order number VGA-PEND-ARM
VGA-PEND-WPLATE Mounting Plate
Mounting plate for VGA-PEND-ARM, compatible with
an AutoDome Series camera
Order number VGA-PEND-WPLATE
VGA-ROOF-MOUNT Roof Mount
Roof parapet mount, white
(VG4-A-9543 Pipe Mount Cap required. Available
separately.)
Order number VGA-ROOF-MOUNT
LTC 9230/01 Flat Roof Mount Adapter
For mounting a unit in an upright position on a flat
surface for roof parapet mount VGA-ROOF-MOUNT
Order number LTC 9230/01
VG4-A-9541 Pole Mount Adapter
Pole mount adapter for a for an AutoDome Series
pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager, designed for poles with a diameter of
100‑380 mm (4‑15 in.), white
Order number VG4-A-9541
VG4-A-9542 Corner Mount Adapter
Corner mount adapter for an AutoDome Series
pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager
Order number VG4-A-9542
VG4-A-9543 Pipe Mount
Pipe mount, white, for an AutoDome Series pendant
housing
Order number VG4-A-9543
VGA-IC-SP In-ceiling Support Kit for Various Bosch
Dome Cameras
Suspended ceiling support kit for various families of
Bosch dome cameras
Order number VGA-IC-SP
VGA-SBOX-COVER Cover for AutoDome Power Supply
Boxes
Order number VGA-SBOX-COVER
VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply
Boxes
Trim skirt for the following AutoDome Series power
supply boxes:
VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2
Order number VG4-A-TSKIRT
9 | AUTODOME 7000 HD