AMAX panel 2000 / AMAX panel 2000 EN Faults or Tamper conditions | en 11
Robert Bosch Engineering and Business Solutions Limited User Guide F.01U.249.500 | V2 | 2011.11
1 Accessory Modules Fail
1Keypad 1 fail
2Keypad 2 fail
3 DX 3010 Fail
4 B420/DX 4020 /-G Fail
2 Power Faults
1AC Fault
2 Fault Battery
3Aux Power Supply Fault
4 Bosch Option Bus Power Fault
5 RF Power Fault
3 Warning Device Failure List
1 Warning Device 1 Disconnected
2 Warning Device 1 Short
3 Warning Device 2 Disconnected
4 Warning Device 2 Short
4 Telephone Line Fail
5 Date and Time Fail
6 Communications failure
1 Communication Failure 1
2 Communication Failure 2
3 Communication Failure 3
4 Communication Failure 4
7Tamper
1 On board Tamper
2Keypad 1 Tamper
3Keypad 2 Tamper
4 Keypad Lock out
5 Sensor Tamper (Zone 1-8)
6 Tamper Zone (Zone 1-8)
8 External Fault
To Next Page
Loading...
