Bosch AMAX panel 2000 - Default Chapter; Table of Contents

AMAX panel 2000 / AMAX panel 2000 EN Table of Contents | en 3
Robert Bosch Engineering and Business Solutions Limited User Guide F.01U.249.500 | V2 | 2011.11
Table of Contents
1 Introduction 4
2 Arming and Disarming the System 8
2.1 Arming the System 8
2.1.1 Arming in AWAY mode 8
2.1.2 Arming in STAY mode 9
2.1.3 Forced arming 9
2.2 Disarming the System 9
2.2.1 Disarming with CODE 9
2.2.2 Disarming with wireless control Key 9
2.2.3 Disarming with Key switch 9
3 Faults or Tamper conditions 10
3.1 System fault or tamper analysis Mode 10
4 Walk test mode 12
5 Event Memory Recall mode 13
6 Reset the Control Panel 14
7 Bypassing 15
7.1 Bypassing Zones 15
7.2 Bypassing Faults and Tamper conditions (Except Zone Tampers) 15
8 Enable / Disable the installers code 16
9 Change individual code 17
10 Keypad alarm operation commands 18
10.1 Duress alarm 18
10.2 Keypad panic alarm 18
10.3 Keypad fire alarm 18
10.4 Keypad medical alarm 18
11 Domestic Dialing 19
Glossary 20
Index 21