AMAX panel 2000 / AMAX panel 2000 EN Domestic Dialing | en 19
Robert Bosch Engineering and Business Solutions Limited User Guide F.01U.249.500 | V2 | 2011.11
11 Domestic Dialing
Domestic Dialing Alarm
When the control panel is activated into zone tamper/zone alarm, it can dial the mobile phone
or telephone number of a family member/friend. A maximum of one telephone number can be
called through the control panel during an alarm.
Contact your installer to enable/disable the Domestic dialinf functionality.
Confirming the Domestic call
All alarm events need acknowledgement.
The transmission sequence is repeated until the control panel recieves an acknowledgement
tome.
The control panel automatically hangs up after 45 seconds if it cannot detect the
acknowledgement tone and redial later.
The user presses [#] between two acknowledgement tones to confirm the alarm.
If the control panel got the [#] acknowledgement from the user, it will send 2 second long
beep as acknowledge tone and hang up the line.
To Next Page
Loading...
