Bosch AMAX panel 2000 - Introduction to AMAX Panel Keypad Operations; Quick Keypad Operation Instructions

4 en | Introduction AMAX panel 2000 / AMAX panel 2000 EN
F.01U.249.500 | V2 | 2011.11 User Guide Robert Bosch Engineering and Business Solutions Limited
1 Introduction
Quick keypad operation instructions
Table 1.1 Quick keypad operation instructions
ICP-AMAX - LED8-8 Zone LED Keypad ICP-AMAX-LCD8 - 8 Zone LCD Keypad
Arming
AWAY arm [code] + [#] / [#] (quick arming)
STAY arm [code] + [*] / [*] (quick arming)
Disarming
Disarm [code] + [#]
Other Commands
Fault and
Tamper Analysis
[code] + [2] [#]
Walk test [code] + [4] [#]
Event recall [code] + [5] [#]
System Reset [code] + [6] [#]
Bypassing zones [code] + [9] [#] [zone] + [*] [#]
Bypassing Faults
and Tamper
conditions
[code] + [97] [#]
Enable/Disable
Installer code
Enable = [code] + [98] [#] Disable = [code] + [98] [*]
Change
individual code
[code] + [99] [#] [newcode] [#]
Alarm Commands
Duress alarm [code] + [0] [#]
Emergency
alarm
Simultaneously press and hold [1] and [3] or [*] and [#]
Fire alarm Simultaneously press and hold [4] and [6]
Medical alarm Simultaneously press and hold [7] and [9]
Default user code = 2580