24 en | Installing AMC2 4W
F.01U.024.965 | V.4 | 2006.09 Installation manual Bosch Security Systems
5.3 Opening the AMC2 4W Case
The AMC2 4W case consists of a top cover mounted with a two-
point snap-in closure on a ground chassis. To open the
AMC2 4W push down the two snap-ins with a srew driver. After
that the cover can be moved to bottom.
Fig. 5.3 Opening the AMC2 4W case
i
NOTE!
To open the AMC2 4W, first, remove all pluggable screw con-
nectors at least the host connection.
To Next Page
Loading...
