Bosch AUTODOME IP starlight 5000i IR - Sectors; Miscellaneous; Illuminator

AUTODOME IP starlight 5000i IR Camera | en 29
Bosch Security Systems
User Manual
2023-01 | 1.3 |
5. To stop the tour, type 8 and click AUX off.
To define a Custom tour
1. Create the individual pre-positions.
2. To add a pre-position into the custom tour, select the pre-position from the general list
and click the triangle button to copy it to the custom tour list.
3. Adjust the custom tour sequence by moving preposition up or down.
4. Select a dwell time from the drop-down list Custom tour .
5. To start the Custom tour:
Return to the Live page.
Select Special Functions.
Click AUX Control.
Type 7 in the input box and click AUX on.
6. To stop the tour, type 7 and click AUX off.
Sequence settings
Include in standard tour (marked with *)
Select this checkbox to include the pre-position in the standard tour.
Upload
Click the button to upload the tour configuration to the camera.
Dwell times
Standard pre-position tour
Select the dwell time in seconds or minutes for the Standard pre-position tour.
Custom pre-position tour
Select the dwell time in seconds or minutes for the Custom pre-position tour.
5.8 Sectors
Sector
The camera’s pan capability is divided into 16 sectors, for a total of 360°.
To define a title for sectors:
1. Place the cursor in the input box to the right of the sector number.
2. Type a title for the sector, up to 20 characters long.
3. To blank the sector, click the check box to the right of the sector title.
5.9 Miscellaneous
Fast address
This parameter allows the appropriate camera to be operated via the numerical address in the
control system. Enter a number between 0000 and 9999, inclusive, to identify the camera.
5.10 Illuminator
Note: This menu page is valid for AUTODOME IP 5000i IR │ AUTODOME IP starlight 5000i IR
│ AUTODOME IP starlight 5100i IR only.
IR mode
By default, the camera is set to automatic illuminator mode (Auto). To deactivate this mode,
select Off.
IR near intensity limit
Select the limit (percentage) of intensity for IR at near focus range. Values range from 0 to 100
(default).