60 en | AUX Commands AUTODOME IP starlight 5000i IR
2023-01 | 1.3 |
User Manual
Bosch Security Systems
11 AUX Commands
AUX Function Command Notes
1 On/Off Auto pan without limits
(Continuous)
2 On/Off Auto pan between limits
7 On/Off Run Custom Pre-Position Tour
8 On/Off Run Pre-Position Tour
18 On/Off Auto pivot Enable
20 On/Off Backlight compensation (BLC)
50 On/Off Playback A (Continuous)
51 On/Off Playback A, single
52 On/Off Playback B (Continuous)
53 On/Off Playback B, single
54 On/Off IR mode AUX on sets IR to Auto.
AUX off sets IR mode off.
Available for AUTODOME IP 5000i IR │
AUTODOME IP starlight 5100i IR only.
57 On/Off Night mode IR Filter Toggle
60 On/Off On-Screen Display (OSD)
67 On/Off Focus adjust for external IR
illuminators
68 On/Off White light illumination AUTODOME IP starlight 5100i IR only
80 On/Off Digital zoom lock
88 On/Off Proportional speed
94 On/- Recalibrate Azimuth Compass
95 On/Off Display Azimuth/Elevation
96 On/Off Display Compass Points
100 On/Off Record Tour A
101 On/Off Record Tour B
104 On/Off Wiper On/Wiper off (One shot) AUTODOME IP starlight 5100i IR only
149 On/Off Toggle Turbo mode
700 On/Off Adjust Proportional speed
control
AUX on, entered repeatedly, cycles
through increasing speeds Super slow,
Slow, Medium, and Fast.
AUX off decreases speeds through the
same settings.
804 On/Off Mask Calibration Procedure
To Next Page
Loading...
