| 18 | BEA 030 | Maintenanceen
1 689 989 114 2021-01-28| Robert Bosch GmbH
5.2 Spare and wearing parts
Designation Order number
BEA 030 1 687 023 577
Oil temperature sensor
<)
1 687 230 068
Battery connecting cable
<)
B+/B– 1 684 463 822
Connecting cable
for cigarette lighter socket
1 684 463 547
Connecting cable TD/TN/EST
<)
1 684 460 196
USB connecting cable 3 m
<)
1 684 465 562
Power supply unit 15 V, 1 A 1 687 023 817
Bluetooth USB adapter 1 687 023 777
Case 1 685 438 626
<)
Wearing part
¶ Disconnect the BEA 030 from the mains.
5. Maintenance
! Work on electrical equipment is only to be
performed by persons with sufficient knowledge
and experience of electrical systems!
5.1 Cleaning
!
Do not use abrasive cleaning agents and coarse
workshop cloths!
¶ The housing and the LCD are only to be cleaned
using a soft cloth and neutral cleaning agents.
6. Decommissioning
6.1 Temporary shutdown
In the event of lengthy periods of non-use:
6.2 Change of location
¶ If the BEA 030 is passed on, all the documentation
included in the scope of delivery must be handed
over together with the unit.
¶ The BEA 030 is only ever to be transported in the
original or equivalent packaging.
¶ Unplug the electrical connection.
¶ Heed the notes on initial commissioning.
6.3 Disposal and scrapping
1. Disconnect the BEA 030 from the mains and detach
the power cord.
2. Dismantle the BEA 030 and sort out and dispose
of the different materials in accordance with the
applicable regulations.
BEA 030, accessories and packaging should be
sorted for environmental-friendly recycling.
¶ Do not dispose BEA 030 into household
waste.
Only for EC countries:
The BEA 030 is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶ Make use of the local return and collection
systems for disposal.
¶ Proper disposal of BEA 030 prevents
environmental pollution and possible
health hazards.
To Next Page
Loading...
