Bosch C 60 - Page 118

118
 Online calibration of adjustment channels
 Enable offset calibration for measurement channel
C 60 Online Measurement
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 Online Measurement + Calibration
Check box to
enable online
calibration of
offset and enter
desired physical
target value
During creation of the measurement channel
In the channel view
Activate switch to
enable online
calibration