Bosch C 60 - Page 47

47
CAN Bus Configuration
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 CAN Bus
 C 60 has two CAN buses
 Both buses are fully configurable
 Baudrate (125kBit … 1MBit)
 11Bit or 29Bit identifiers
 Input configuration
 Read messages from CAN bus and convert to C 60 measurement / display
variables
 Supports row counter configuration
 Output configuration
 Write C 60 measurement variables to CAN messages
 Output frequency and row counter configurable
 CAN gateway functionality (transfer from one bus to the other)