Bosch CDG634A 0 Series - Childproof Lock; Activating and Deactivating Child Lock; Basic Settings; Overview of Basic Settings

Childproof lock en
15
3.
Pour the rice and milk into the accessory until you
have a mixture that is no more than 2.5cm deep.
4.
Observe the information in the overview and start
the program. →Page13
5.
Stir the rice after cooking.
a The rice pudding will absorb the remaining milk.
Making fruit compote
The program is only suitable for fruits with stones and
pips.
1.
Weigh the fruit.
2.
Add approx. 1/3 of the amount of water.
3.
Add sugar and spices to taste.
4.
Observe the information in the overview and start
the program. →Page13
Sterilising bottles
You can sterilise bottles in your appliance using the
conventional sterilisation process.
1.
Clean the bottles with the bottle brush immediately
after use.
2.
Clean the bottles in the dishwasher.
3.
Place the bottles into the perforated steaming tray
such that they do not touch one another.
4.
Observe the information in the overview and start
the program. →Page13
5.
Dry the bottles with a clean cloth.
10 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
10.1 Activating and deactivating the
childproof lock
You can activate and deactivate the childproof lock re-
gardless of whether the appliance is switched on or off.
1.
Press and hold ⁠ for approx. 4 seconds to activate
the childproof lock.
a A confirmation notification will appear on the dis-
play.
a The control panel is now locked. The appliance can
only be switched off using the ⁠button.
a When the appliance is on, ⁠ will be lit. When the
appliance is off, ⁠ will not be lit.
2.
Press and hold ⁠ for approx. 4 seconds to deactiv-
ate the childproof lock.
a A confirmation notification will appear on the dis-
play.
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Following a lengthy power failure, the settings that
you will need to configure before you can use the
appliance again will appear on the display. You will
need to set the language, time and date again.
Setting Selection
Language Other languages available
Time Time in 24-hour format
Date Set the current date
Water hardness 00 (softened)
01 (soft)
02 (moderately hard)
03 (hard)
04 (very hard)
Audible signal Short (30s)
Medium (1min)
1
Long (5min)
1
Factory setting (may vary according to model)
Setting Selection
Button tone Switched off
1
(the button
tone for the ⁠⁠button re-
mains active even when
the button tones are de-
activated)
Switched on
Display brightness Can be adjusted to one of
five different levels
Clock display Digital
1
Off
Lighting Switched on during
operation
1
Switched off during oper-
ation
Operating mode on start-
up
Heating functions
1
AutoPilot
Night-time dimming Off
1
On
Brand logo Display
1
Do not display
Fan run-on time Recommended
1
Minimum
Factory settings Restore
Do not restore
1
1
Factory setting (may vary according to model)