Bosch ConnectS2 - Mounting with Solar Frame, glued

Connect S2
| Solar Frame | User Guide
© Robert Bosch Manufacturing Solutions GmbH
Bosch Connected Industry
20 |
39
Mounting with Solar Frame, glued
The Solar Frame can be glued directly onto a smooth, flat surface using the mounting set 0 mm - 3 mm.
INFO
Follow the instructions for using the AT-8040 adhesive in this chapter!
Direct gluing of the Solar Frame is only permitted on the materials listed below
Manufacturer Material
Aluminum, unpainted/uncoated
Stainless steel, unpainted/uncoated
Lamilux
High Impact
HG 4000
Fabric 48%
Optiplan-Polydet
High Gloss
Performance plus
Standard plus
PowerStar EP
Vetroresina G60/30 Gloss sanded standard
Schmitz Cargobull
Cover sheet – outside
Cover sheet – inside (PVC)
Kögel Cover sheet – outside
Krone Cover sheet – outside
Kiesling
Cover sheet – outside
Cover sheet – inside