6 720 820 871 (2016/12)CR 400 | CW 400 | CW 800
Working with the main menu | 23
The following table shows you how to adapt a time program for the heating system.
Operation Outcome
Open the menu for adapting a time program for the heating system
▶ If the standard display is active, press the menu key to open the main menu.
▶ Turn the selector to highlight Heating.
▶ Press the selector to open the Heating menu.
▶ Turn the selector to highlight Time program.
▶ Press the selector to open the Time program menu.
▶ Turn the selector to highlight My time program 1 or 2.
Depending on the installed system, it may be necessary to select a heating circuit.
▶ Press the selector.
▶ Press the control knob again to activate the input field for the day of the week or the
group of days.
▶ Turn the selector to select a day of the week or a group of days and press the selector.
The changes in this menu only affect the selected day of the week or the selected
group of days.
Moving switching time
▶ Open the menu for adapting a time program for the heating system.
▶ Turn the selector to highlight a switching time.
▶ Press the selector to activate the input field for the switching time.
▶ Turn the selector to move the switching time.
The modified time slot is displayed in bold in the time program bar chart.
▶ Press the selector.
The user interface operates with the modified settings.
Set the operating mode/temperature for a time slot
Depending on the type of time program, an operating mode or a temperature can be set
here for each time slot:
▶ Open the menu for adapting a time program for the heating system (Æ top).
▶ Turn the selector to highlight the operating mode/temperature setting of a time slot.
▶ Press the selector to activate the input field.
▶ Turn the selector to select an operating mode (heating or setback mode) or to set the
temperature.
The modified time slot is displayed in bold in the time program bar chart.
▶ Press the selector.
The user interface operates with the modified settings.
Add switching time
▶ Open the menu for adapting a time program for the heating system (Æ page 23).
▶ Turn the selector until the empty input field underneath the last switching time is
highlighted.
Table 18 Adapting time program to suit individual heating preferences
6 720 815 237-27.1O
6 720 815 237-28.1O
6 720 815 237-29.1O
6 720 815 237-30.1O
6 720 815 237-31.1O
To Next Page
Loading...
