Bosch CW 800 - Page 34

6 720 820 871 (2016/12) CR 400 | CW 400 | CW 800
34 | Working with the main menu
▶ Press the selector to open the Selection heat. circ./DHW menu.
If Total system is selected, all parts of the system are highlighted.
▶ Turn the selector to highlight a heating circuit or a DHW system.
▶ Press the selector.
▶ The selection for the heating circuit or DHW system is undone. Press the selector
again to select the heating circuit or the DHW system again.
Undoing the selection of a heating circuit or DHW system also automatically undoes
the selection of the entire system.
▶ Turn the selector to highlight Continue and press the selector.
The user interface operates with the modified settings.
▶ Check the settings for heating and DHW and make any necessary adjustments
(Æ Chapter 5.5, page 31).
Interrupt a holiday program
During the holiday period, the display indicates until when the holiday program will be
active. If two or more heating circuits are installed, the heating circuit must be selected
before interrupting the holiday program (Æ Chapter 4.1, page 9).
▶ Press the man key.
Manual operation is activated. The room temperature that is currently valid is shown
in a pop-up window in the lower part of the display.
▶ Change the required room temperature, if necessary.
▶ Press the auto key to reactivate the holiday program.
If the holiday program is set to As Saturday, you can also interrupt the holiday program
by turning the selector. The change is effective until the active time program reaches the
next switching time. The holiday program applies again from this switching time onwards.
Delete the holiday program, e.g. to bring it to an end early
▶ Open the menu for the holiday program (Æ page 33).
▶ Turn the selector to mark the Delete menu item and press the selector.
A pop-up window appears in the display prompting you to confirm whether the
selected holiday program is to be deleted.
▶ Turn the selector to highlight Yes and press the selector.
▶ A message is displayed in a pop-up window indicating which holiday program has
been deleted.
▶ Press the selector.
The holiday program is deleted.
Operation Outcome
Table 29 Setting up, interrupting or deleting a holiday program
6 720 815 237-49.1O
6 720 815 237-50.1O
6 720 815 237-51.1O