Bosch CW 800 - Set the holiday time; Select and set the heating circuit and DHW system for the holiday program

6 720 820 871 (2016/12)CR 400 | CW 400 | CW 800
Working with the main menu | 33
The following table shows you how to set up a holiday program, interrupt a holiday program that is active and delete a holiday
program. The holiday program starts on the set date only in heating circuits in which automatic mode is active.
Operation Outcome
Open the menu for the holiday program
▶ If the standard display is active, press the menu key to open the main menu.
▶ Turn the selector to highlight Holiday.
▶ Press the selector to open the Holiday menu.
▶ Turn the selector to highlight Holiday 1, 2, 3, 4 or 5. If the period of time has been set
for a holiday program, the start date is displayed in the menu.
▶ Press the selector.
If the period of time has already been set for the holiday program, the Holiday 1, 2, 3,
4 or 5 menu is displayed. If the period of time for the holiday program has not been
set, the start date and end date for the holiday program must be set. After this, the
Holiday 1, 2, 3, 4 or 5, menu is displayed.
Set the holiday time
▶ Open the menu for the holiday program.
The menu item for entering the start and end date of the holiday period opens. The
input field for entering the start day is highlighted.
▶ Turn the selector to highlight the day, months or year for the start or end date and
press the selector.
The selected field is enabled for input. If the holiday time has not yet been entered,
today's date is set as the start date. The end date is a week after the start date.
▶ Turn the selector to set the day, month or year for the start or the end date and press
the selector.
▶ Once the holiday time has been set, turn the selector to highlight Continue and press
the selector.
If the display switches to the higher menu level, the user interface is operating with
the modified settings.
If the user interface does not switch to the higher menu level, follow the instructions
on the display.
Select and set the heating circuit and DHW system for the holiday program
▶ Open the menu for the holiday program.
▶ Turn the selector to highlight Selection heat. circ./DHW.
Table 29 Setting up, interrupting or deleting a holiday program
6 720 815 237-46.1O
6 720 815 237-47.1O
6 720 815 237-48.1O