15
Turning the System Part On, with No Delay
I have this feature.
I do not have this feature.
Use this function to turn on Part of the system without entry or exit
delays.
1. Make sure all points are normal. With your system’s display
showing, press the [0] key twice.
2. If all points are normal, the display shows the following for 3 sec.
and the keypad beeps three times. If your system has faulted
points, you should return them to normal, or refer to Bypassing
Points (on page 16).
3. After 3 sec. the system turns on.
4. To turn the system off, enter your personal passcode.
To Next Page
Loading...
