26
Show Passcode Types
I have this feature.
I do not have this feature.
This feature requires a passcode.
Use this feature to find out which passcode type is currently assigned to
each of the users of your system. Passcode types are shown on lights 1
through 8. User one is light 1 and so on. See Change Passcode Type, on
page 27, for a description of passcode types.
1. Make sure that the system is turned off.
2. Press the [6] key. The point lights (1 through 8) come on,
showing the current passcode type for users 1 through 8.
3. Light status indicates passcode type:
Flash (fast blink) Owner Type
Blink (slow blink) User Type
On One-Time Type
Off Disabled passcodes and One-Time
passcodes that have been used
once to turn the system off.
4. Press [CLEAR] to return to the off display.
To Next Page
Loading...
