D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 108
18.1 [1] Program Menu
With the Program Menu, you can program parameters to make your system operational, including
phone number and format, enhanced communication options, primary and backup routes, and
notifications.
18.1.1 [1] Reporting > [1] Phone Menu Parameters
The control panel can dial as many as four different telephone numbers when sending event reports.
In this menu, you can program the telephone numbers and the phone format.
Phone 1 Modem4/Contact ID ___________________________________________
Phone 2 Modem4/Contact ID ___________________________________________
Phone 3 Modem4/Contact ID ___________________________________________
Phone 4 Modem4/Contact ID ___________________________________________
Phone Number
B91x/B92x keypads Configuration of Phone Number
1. Enter the installer passcode, and then go to the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [1] Phone > [1] Phone Number menu option. The
keypad display toggles between showing the phone number and phone format for the point.
3. Press [ENTER] to edit the point and then [ENTER] to edit the phone number for the selected
path.
4. Delete existing characters, if necessary, and then enter the new phone number.
5. Press [ENTER] to save the phone number.
6. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Phone Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [1] Phone > [1] Phone Number menu option. The
keypad shows the phone number for the point.
3. Use /[PREV] or /[NEXT] to go to the path you wish to edit.
4. Press the Edit softkey to change the phone number.
5. Delete existing characters, if necessary, and then enter the new phone number.
6. Press the Save softkey.
7. When the keypad shows Parameter Saved, escape from the menu.
Phone Format
B91x/B92x keypads Configuration of Phone Format
1. Enter the installer passcode, and then go to the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [1] Phone > [1] Phone Format menu option. The
keypad display toggles between showing the phone number and phone format for the point.
3. Press [ENTER] to edit the phone path and then [NEXT] to go to the format option.
4. Press [ENTER] to edit the phone format for the selected path.
5. Use the [PREV] and [NEXT] buttons to toggle between the Contact ID and Modem4 option.
6. Press [ENTER] while reviewing the desired format to save the new format selection.
7. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Phone Format
1. Enter the installer passcode, and then open the [1] Installer menu.
To Next Page
Loading...
