D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 126
18.1.14 [6] Users Menu Parameters
The control panel can store up to 999 users. In this menu, you can edit user passcodes.
Users
B91x/B92x keypads Configuration of Users
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [6] Users menu option. The keypad shows the passcode of the
currently selected user.
3. Press [PREV] and [NEXT] to scroll through the list of users.
4. Press [ENTER] to edit the desired user. The curser flashes at the editing location.
5. The [ESC] key acts as a [Backspace] button. Press [ESC] to delete the characters, and then
enter the new numbers.
6. Press [ENTER] to save the programming.
7. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Users
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [6] Users menu option. The keypad displays the user passcode for
the selected user.
3. Press the /[PREV] and /[NEXT] softkeys to toggle through various users.
4. Press the Edit softkey to change the passcode.
5. On the B93x, the [ESC] key acts as a [Backspace] button. The B94x has a [Backspace] key.
Delete the current characters, and then enter the new numbers.
6. Press the Save softkey.
7. When the keypad shows Parameter Saved, escape from the menu.
To Next Page
Loading...
