Bosch D7412GV4 - Test

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 20.0 Compatible UL Listed
Com
p
onents
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 150
B915 Keypads Opt. Opt. Opt. Opt. Opt. Opt. Opt.**3 No Opt.**3 Opt.**3 Opt.**3 No No
Household Burglary Household Fire Household Fire/ Burglary Combined Central Station Burglary Police Connected Burglary Local Burglary Local Fire/Burglary Combined D9412GV4/D7412GV4 Local Fire D9412GV4/D7412GV4 Local and Central Station Fire Combined D9412GV4/D7412GV4 Local and Central Station Fire/ Burglary D9412GV4/D7412GV4 Central Station Fire/ Burglary Combined D9412GV4/D7412GV4 Central Station Fire D9412GV4/D7412GV4 Electrically Actuated Transmitter D9412GV4/D7412GV4
B920 Keypads Opt. Opt. Opt. Opt. Opt. Opt. Opt.**3 No Opt.**3 Opt.**3 Opt.**3 No No
B921C Keypads Opt. Opt. Opt. Opt. Opt. Opt. Opt.**3 No Opt.**3 Opt.**3 Opt.**3 No No
B930 Keypads Opt. Opt. Opt. Opt. Opt. Opt. Opt.**3 No Opt.**3 Opt.**3 Opt.**3 No No
B942/B942W Keypads Opt. Opt. Opt. Opt. Opt. Opt. Opt.**3 No Opt.**3 Opt.**3 Opt.**3 No No
D130 Relay Module Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
D1255/D1255B Keypads Opt.** Opt. ** Opt. ** Opt. ** Opt.** Opt** Opt. ** Opt.** Opt. ** Opt. ** Opt. ** Opt.** No
D1260/D1260B Keypads Opt.** Opt. ** Opt. ** Opt. ** Opt. ** Opt.** Opt. ** No Opt. ** Opt. ** Opt. ** No No
D1255RB, D1256RB, D1257RB Opt. Opt. ** Opt. ** Opt. Opt. Opt. Req. Req. Req. Req. Req. Req.
D1640 Transformer Required for all applications.
D8004 Transformer Enclosure Opt. Opt. Opt. Opt. Opt. Opt. Req. Req. Req. Req. Req. Req. Opt.
D8125 Class B, Style 4.0 POPEX Module Required for the D9127T/U POPITs.
D8125MUX Class B, Style 4.0 Required for MUX devices. Refer to Section 21.1 D8125MUX on page 151.
D9127T/U Class B, Style A POPIT
Modules
Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
D8128D OctoPOPIT Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
D8129 OctoRelay Optional. For remote annunciation of system functions.
D8130 Release Module Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
D8132 Battery Charger
Refer to Table 41: Current Rating Chart for
Standby Battery Calculations
No No No No No No No
D9210C Access Control Interface Module Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. No
*The D125B is required to connect two-wire fire alarm initiating devices. The D125B provides two powered loops for connecting listed two-wire smoke detectors.
The D129 provides two non-powered Class “A” initiating circuits.
** Use of ICP-SDI-9114 will permit installation on Burg/Fire combination system installations
**3 Commercial fire installations require separation between Fire and Burg devices. All fire devices would be required to be on a separate bus than burg.
***This module is required for SDI applications used on a Burg/Fire combination system for bus isolations.