Bosch EPS 807 - Mounting the Rotary Encoder B31

1 689 975 140 2013-07-01| Robert Bosch GmbH
Repair works | EPS 807 / 815 | 23
en
6.6.11 Mounting the rotary encoder B31
i The rotary encoder B31 is not contained as standard
in the EPS 815 and is retrofitted in conjunction with
the test sets VPM844 and CAM847. In it's as-deliv-
ered condition, the EPS 815 has a cover in place of
the rotary encoder B31.
1. Push the rotary encoder B31 (Fig. 41, Pos. 3) onto
the coupling shaft or attach the cover (Fig. 33,
Pos.2) and secure with hexagon socket head bolts
(Fig. 41, Pos. 4).
2. Tighten the hexagon socket head bolt (Fig. 41,
Pos. 5) with a torque wrench.
Tightening torque: 1.2 Nm
3. Attach the connecting cable.
1
2
3
4
5
458741-19_Pal
Fig. 41: Drive motor with rotary encoder B31
4. Attach the side covers of the EPS 815.