EasyManua.ls Logo

Bosch FPA-1200-MPC - Diagnostics

Bosch FPA-1200-MPC
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Panel Controller All functions at a glance | en 13
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
Select by number
Display a list of all elements that can be isolated
Search for an element in a list by entering the number
Isolate or de-isolate an element
3.3 Diagnostics
Element details
All info for one element: Display all diagnostic information about an element on a loop of
an LSN module.
Info for element group: Select and display specific diagnostic information about several
elements in the selected LSN module.
Info for all elements on the module: Select and display specific diagnostic information
about all LSN elements of the selected LSN module.
Modules
Module passport: Display diagnostic information for each individual module: production
data, software version, CAD-ID, compatibility.
Module Compatibility: Display the software version of the selected module in
comparison with the version of the panel software.
Module status: Display hardware diagnostic data of the selected module.
Only for LSN modules:
Module status and counters
Reset counters: Reset the counters that record the frequency with which various events
occur.
Hardware
Address cards: Additional display per card slot of the serial number and number of
addresses per card.
Display
LED test: Test all LED displays on the panel controller. These remain lit for the
duration of approx. five seconds.
Key test: Test the operativeness of the membrane keypad.
Display test: Test the operativeness of the display.
Display touch test: Test the operativeness of the touch-sensitive surface.
Adjust touch screen (calibration): Adjust the location precision when touching the
touch screen.
Serial interface: Display statistical data for the transmission.
CAN bus: Display status of CAN interfaces.
Panel passport
Display diagnostic information such as manufacturing data or software version of the panel
controller.
Diagnostics -> Element details Modules
Hardware Panel passport
LED test on modules History log
Network VAS

Table of Contents

Other manuals for Bosch FPA-1200-MPC

Related product manuals