Bosch FPC-500-2 - Page 16

16 en | Operation Conventional Fire Panel
F.01U.172.982 | 5.0 | 2012.04 Operation Guide Bosch Sicherheitssysteme GmbH
Displaying zones in test mode
Shows a list of all current zones in test mode, including the
time stamp.
Displaying pre-alarms
Displays a list of all current pre-alarms with the corresponding
time stamps.
Displaying the event log
Displays a list of all events with the corresponding time stamps.
A list of events can be found in Section A.1 Event Memory,
page 29
You can use the arrow keys to switch between the individual
entries. If you press and hold an arrow key, the display moves
10 steps in the corresponding direction. A description of the
displayed events can be found on Page 29 ff.
Displaying the test log
Call up the menu; see Section Opening the menu, page 15
Press the "Menu" key and then zone key 1.
This takes you to the Current Events submenu.
Press zone key 2.
The LCD display shows the current disablements.
i
1
2
Press the "Menu" key and then zone key 1.
This takes you to the Current Events submenu.
Press zone key 3.
The LCD display shows the current tests.
i
1
3
Press the "Menu" key and then zone key 1.
This takes you to the Current Events submenu.
Press zone key 4.
The LCD display shows the current pre-alarms.
i
1
4
Press the "Menu" key and then zone key 2.
This takes you to the History submenu.
Press zone key 1.
The messages in the event memory are displayed.
i
2
1